
雙組份密封膠的固化需要一定時間
時間:2018-04-03 來源:http://m.jianyoucc.cn/ 發布人:昌盛機械
1.由于雙組份密封膠的固化需要一定時間,因此雙組份打膠機,已涂了雙組份密封膠的玻璃應水平輕輕搬動。
1., since the curing of two component sealants takes a certain time, the two component glue machine has been coated with two components of sealant glass and should be moved gently.
2.A組、B組份膠應保持清潔,嚴防異物進入膠中。
Group 2.A and B components should be kept clean, and foreign matters should be strictly prevented from entering the glue.
3.在連續工作過程中,膠槍每次停止工作時間一般不得超過20分鐘,否則,應用A組份膠沖出全部混合膠,直至單一的A組份膠從槍口排出為止。
3. in the continuous working process, the glue gun will not stop working more than 20 minutes each time. Otherwise, all the mixed glue is washed out with A component glue until the single A component is discharged from the muzzle.
4.高壓膠管不得強行擠壓、彎曲,防止影響系統正常工作。

4., high pressure hose should not be forced to bend or bend to prevent the system from functioning normally.
5.混膠器應經常保持暢通,以保證良好的出膠效果。如遇堵塞情況,可用丙酮浸泡后清洗。建議每5組清洗一次。
5., rubber mixer should be kept regular and smooth, so as to ensure good glue production. In case of clogging, acetone can be soaked and cleaned. It is suggested that every 5 groups be cleaned once.
6.當膠槍長時間不用時(超過一周),應拆下槍體使用溶劑將膠槍和混膠器內的殘留膠體清洗干凈。
6., when the glue gun is not used for a long time (more than a week), the gun body should be removed and the residual colloid in the glue gun and glue mixing machine should be cleaned with solvents.
7.不同雙組份膠生產廠家所生產的膠內含雜質數量不同,根據實際情況清晰B組分的過濾網及單向止回閥,建議每兩組清洗一次.
7. the number of impurities in the rubber produced by the different double component rubber manufacturers is different. According to the actual situation, the filter net and the one-way check valve of the B component are clear. It is suggested that every two groups be cleaned once.
本文由雙組份打膠機為您提供,我們的網站是:http://linshi.jncsjx.com我們將以全心全意的熱情為您提供更優質的服務,歡迎您的訪問!
This article is provided by the double component glue machine for you. Our website is: http://linshi.jncsjx.com we will provide you with more quality service and welcome your visit with wholehearted enthusiasm.
- 玻璃廠老板注意!丁基膠涂布機打膠有氣泡?這臺設備徹底解決! 2025/12/19
- 春節停機別忘保養!中空玻璃加工設備這樣維護,開春開機不趴窩 2025/12/18
- 1分鐘看懂全自動中空玻璃生產線!全程不用人工搬太爽了 2025/12/18
- 中空玻璃密封差?第一道關得靠這臺臥式丁基膠涂布機! 2025/12/18
- 中空玻璃打膠總翻車?雙組份打膠機效果驚艷到離譜! 2025/12/17
- 中空玻璃密封差?這臺中空玻璃丁基膠涂布機才是關鍵! 2025/12/17
- 全自動鋁條折彎機生產一體折彎鋁條只能有一個接口嗎? 2025/12/17
- 玻璃廠趕單不用愁!雙板壓中空玻璃生產線效率直接拉滿 2025/12/17
- 中空玻璃生產線的丁基膠的內溢與解決方案 2025/12/16
- 中空玻璃生產線的“關鍵輔助”:丁基膠涂布機的核心價值科普 2025/12/13
產品分類Product categories
聯系我們Contact us
- 咨詢熱線:0531-85717458 13705446998
- 公司地址: 山東省德州市齊河安頭鄉企巢工業園
- 掃碼聯系我們:

當前位置:



